13 Apr How to Create Your Own Dog Mask – The Basics
In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you put the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and http://www.tag-china.com/?p=38223 use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain the ears are flat and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll need to do some sanding to make sure that it is safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.